The strap of a new cheap nixon watches is basically a little longer, and it’s a common practice to fit multiple users. If it’s a common steel cheap nixon watches strap, cut off a few paragraphs. If it’s a leather strap, make some adjustments. But if it is a special material, it is recommended to adjust the repair point of the special cheap nixon watches.
How about the cheap nixon watches band?
Before the strip is unopened, roughly measure how many bands of bands will be removed:
1. Take the ring off the cheap nixon watcheses and let the strap stand on the cheap nixon watcheses.
Good for the next move. It’s best to have a piece of flannelette underneath, which can protect the love cheap nixon watches
2. Bring the form after the split, with a pointed tool (I am using small scissors) along the strap back arrows to the position of the latch, against the round bumps, push toward external use, in the direction shown by the arrow the bolt.
3. After removing the strap of the right length, you can put the strap back. It may be a bit tight, and you can find something soft and hard (I have a plastic lighter) tapping a few times, or pushing hard enough to fit it back. Remember to fasten the buckle.
To make sure that the band is not connected by a screw, it is made by a pin or an open pin
How to use the tape detachable device: place the cheap nixon watches strap in the grooves of the detachable belt, and take the disassembly needle (also called the thimble) to the side of the band to turn the handle clockwise. See the details below. Because the strip pin is a vulnerable part, please keep the needle and the top of the strap pin perpendicular, otherwise it is easy to break.
The purchase price is: 3 yuan/root
1. Most detachable straps are marked on the back of the cheap nixon watches band, and the tip of the band can be pushed along the direction of the arrow.
2, if there is no arrow marks can observe hole dowels in the end, if it is smooth, but also with A tight slit, we call A side, the other end for circular face, we call B, we need to nail tip from B to A direction.
Replace the strip pin method: rotate the handle to counterclockwise, then lever off the end of the ring and separate the handle to remove the broken needle.
Then install the new strip pin, buckle the circle, and seal!!!